General Motors to declare bankruptcy tomorrow

Tomorrow will be a truly sad day for the automobile industry. General Motors, the largest automobile manufacturer in the world, bankrupt. It just doesn't make sense saying it, even though we've been talking about it for months now.

General Motors was once THE company to watch in the industry. You could have said, what General Motors wants is what America wants. Unfortunately that isn't the case any more. Poor management decissions and the inability to keep up with market trends led to yearly losses in the billions of dollars. Couple that with legacy costs, the UAW, and the failure to restructure after government loans to the tune of $20 billion and we're left with the smoldering pile of goo that was once General Motors.

The saddest part is the loss of some great GM brands. We lost Oldsmobile in 2004. Hummer and Saab had been up in the air for the last 6 or so months, Saturn was poisoned by GM management over the last 15 + years. Opel is being divided up. And the biggest blow, Pontiac. Finally when Pontiac is making some great, fun cars they get the rug pulled out from under them.

This leaves GM with just Chevrolet, Cadillac, Buick, and GMC truck. I doubt we'll see the giant of GM that once was in the 1950s and 60s.

Stay tuned for more info as it becomes available.

2008 Chevrolet Impala 50th Anniversary Edition

The Chevrolet Impala has long been a favorite of ours. For 2008, not only will General Motors be marking their 100th anniversary, but Chevrolet will be marking the 50th anniversary of the Impala. Now before we get all excited and start dreaming of the return of the ever popular 94-96 Impala SS. We have to pop out balloon and come back to earth.

What we have for a special 50th anniversary edition is a dressed up Impala LT. Nothing too special, but for a paint and badge option. You will get an Impala that is a little different from the rest. The LT comes as an already well equipped grocery getter, though here are some of the major items you'll get with the 50th.

*Sports Suspension

*18 inch wheels

*Rear Spoiler

*2 Tone leather interior

*Special 50th Anniversary badges, doorsills & embroidery

*Choice of Black Granite Metallic or Red Jewel Tintcoat paint

Otherwise, the rest of the car is a pretty much standard affair. 3.5 liter V6 pushing 211Hp with 214 lb. ft. of torque. And will be a FlexFuel car. Able to run on both gasoline and E85 Ethanol. OnStar will of course, also be standard.

Now if I worked and GM(and I wish I did). I would have based the 50th anniversary Impala on the Impala SS. But that's just me. That would have given the just that extra bit to make it a really special car. I would also make maybe two or three thousand of them. After all, isn't that what makes a special edition a special edition? We'll take ours in black at any rate.

Source: GM.

PRESS RELEASE:

CHEVROLET MARKS 50 YEARS OF THE IMPALA WITH COMMEMORATIVE EDITION

DETROIT – An iconic brand of America's automotive market for half a century, Chevrolet's venerable Impala celebrates its golden anniversary in 2008. Chevy is recognizing the milestone with a commemorative model.

Like the original 1958 edition, the 2008 Impala 50 th Anniversary Edition is distinguished with unique trim and amenities, giving customers a special product infused with the fun-to-drive spirit that has characterized the Impala for half a century.

"Chevrolet is thrilled to mark 50 years of the Impala," said Ed Peper, Chevrolet general manager. "Few brands can claim such a heritage and throughout the decades, Impala has always stood for the value, performance and style that has made Chevrolet America's car."

The Impala 50 th Anniversary Edition goes on sale in spring 2008. It is based on the popular and well-equipped Impala LT, with the following unique and standard features:

* FE3 Sport Suspension (replaces the FE1 Touring Suspension)

* Four-wheel ABS

* Eighteen-inch alloy wheels (replaces 16-inch wheels)

* Rear spoiler

* "50 th Anniversary" Impala badge on the C-pillar

* Two-tone, leather-trimmed seats and "50 th" logo embroidered on the front headrests
* Eight-way power-adjustable driver seat (replaces six-way adjustability)

* Leather-wrapped steering wheel with accent-color thread (includes audio controls)

* Ebony carpet

* Ebony floor mats with accent threading

* "50 th" Anniversary emblem on the sill plates

* Two premium exterior colors: Black Granite Metallic or Red Jewel Tintcoat

The 50 th Anniversary Impala also includes a one-year upgrade to the OnStar Directions and Connections package, including Turn-by-Turn Navigation.

Also standard is the Impala's convenient flip-and-fold rear seats, the cushions of which flip forward to reveal a storage tub that serves as a covered storage area beneath the seat and offers convenient grocery bag hooks. A generous pass-through from the trunk can be created by flipping the seat bottoms forward and the seat backs flat – an exclusive feature in the midsize segment.

The 50 th Anniversary Impala is powered by a refined and efficient 3.5L V-6, rated at 211 horsepower (157 kW)* and 214 lb.-ft. (290 Nm)* of torque. Vehicles with federal emissions systems in the United States are equipped with the 3.5L engine, which is compatible with E85 ethanol fuel, allowing the vehicle to run on any combination of gasoline and/or E85.

When using gasoline only, the 3.5L-equipped Impala is EPA-rated at 29 mpg on the highway.

Chevy Volt Teaser Shot

Here's a teaser shot out of General Motors today. Gives you an idea of what the Volt production car will look like, but without giving too much away.

GM Vice Chairman Bob Lutz vowed at the Los Angeles Auto Show that the Volt project is working at full steam ahead. This is all in order to have the Volt in production by the end of the decade. He also announced that we will start seeing driveable prototypes on the road as early as spring of 08.

I like what I'm seeing from this teaser shot. The styling follows along the lines of Chevrolet's current line up. The grille work reminds me of the new Malibu. You can also make out the low sleek roofline carried over from the concept Volt.

More info as it becomes available.

Source: GM

Super Bowl ads. Ford, Chrysler, & VW oddly missing

We got word that there will be four automakers with ads during the Super Bowl this year. General Motors will have a Chevrolet 60 second spot during the second quarter and Cadillac will be sponsor for the pre and post game shows.

Hyundai and Toyota will both have two spots each. Also announced is a spot from Audi. This marks their first time advertising during a Super Bowl in 20 years. Theirs will be a two minute long spot featuring the Audi R8.

Toyota's ad will more than likely pump up the new Sequoia and Tundra pickup. Though I highly doubt that it will do anything to help the Tundra's image right now.

Cars.com will also have a 30 second spot this year.

Strangely though is the lack of an announcement that Ford or Chrysler will be having spots. There is still time for them to jump on the band wagon, so we'll see where it goes.

I watch the Super Bowl just for the car ads. General Motors has always topped our list of favorites. So as a bonus, we're including our favorite GM spot from the Super Bowl in 06.


Source: Automotive News, Audi.

GM to halt production at three factories

GM has plans in place to cut production in the first quarter of 08 to help dealers control their excess inventories. Though today, The Detroit News announced that GM will halt production at three factories for two weeks. Production is limited to just the Chevrolet Silverado and GMC Sierra as of right now. The factories effected are, Pontiac, Michigan, Fort Wayne, Indiana and Oshawa, Ontario Canada. The factories will stop production effective December 31st.

Source: The Detroit News.

Chevrolet Chevelle Concept

General Motors' Revitalization in Action team has dreamed up many of the modern concept cars that we drool over year after year. As a concept, we aren't sure if the newest car will be come a reality. Though you have to admit that the Chevelle concept surely hits on the highs of the original Chevelle muscle car of the 60s & 70s. There is not much on the details of the concept. Other than it is based on the rear wheel drive Zeta platform. The addres for the website include NAIAS, so we're assuming that we'll see the Chevelle Concept at the North American International Auto Show in Detroit next month.

Source: GMInsideNews.

Sneek peek: Corvette ZR1 6.9 L LS9 V8

This one got leaked out by the guys over at Jalopnik.com yesterday. This is a sneek peek of the 2009 Corvette ZR1s 6.9 Liter LS9 V8 engine. Horsepower should be somewhere in the neighborhood of 650hp. The LS9 is a Supercharged version of the 6.2 L LS3 used in the stock Corvette. The supercharger also features unique integrated twin intercoolers for optimum performance. The new ZR1 will debut in January at the North American International Auto Show in Detroit.

Since there is not much info coming out of GM. We'll keep you posted as it develops. We'll be in Detroit for the unveiling so it should be very exciting.

Integrated Twin Intercoolers. Intercooler cut away.

Chevrolet Volt in production by 2010!

Yup. We heard it right. Direct from Bob Lutz's mouth to our ears. At the Reuters Auto Summit in Detroit Mr. Lutz announced that a production version of the Volt concept car will be in production by the end of 2010.

Though it will not look anything like the concept car. The first test of the Volt will come by Easter of 2008. Which is a polite way of saying we have testing prototypes built and ready to go, or at least very close.

GM's hopes are to move above Toyota in the marketplace. Toyota is currently the industry leader in the "Green" market. GM currently has two suppliers for the lithium-ion batteries working overtime to further enhance the durability and performance of the batteries.


Sounds very exciting to see this much development. Especially when the concept was just unveiled at Detroit in January 07. This should definitely have Toyota standing on their toes.


Source: Reuters

SEMA 07: More GM E85 performance madness

Following hot on the heels of the C6RS Corvette, is the 1934 Chevy Coupe E85 FlexFuel Hotrod. This time around it's a 2.0 liter Ecotec Turbo, with Stage III tuning from GM Performance Parts. In total the engine makes a very impressive 500 Horsepower! The body is a reproduction that has been channeled and chopped. The suspension has been custom fabricated with power hitting the ground through a 8 3/8 quick change rear end with 5.20 gears. The wheels are 18 & 20 inch Budnik wheels with 29 & 35 inch tall Excelsior tires front and rear respectively. Full press details available below.

FLEXFUEL CHEVY HOT ROD DEMONSTRATES VINTAGE STYLE AND MODERN ALTERNATIVE-FUEL PERFORMANCE

With a 500-horsepower engine, a channeled body and a chopped top, GM's custom street rod looks right at home on the salt flats of Bonneville. But instead of a traditional gasoline V-8, this '34 Chevy replica rod sports a turbocharged 2.0L Ecotec engine that runs on E85 ethanol. Appropriately, it has been dubbed the FlexFuel Chevy Hot Rod.

"Since the 1930's, hot rods have embodied American ingenuity, aesthetic flair and the quest for performance," said Bryan Nesbitt, vice-president of General Motors North American Design. "The ethanol Hot Rod is a modern statement that today's hot rodder can address energy concerns about the consumption of petroleum without sacrificing performance or style.

"The car's low-slung stance and stripped-down essence suggests track cars and speed racers of the late 1940s and early 1950s. Open hood sides reveal the high-powered Ecotec engine, which has been pumped up with the help of GM Performance Parts' Stage III performance kit and a larger turbo. The higher octane of E85 enabled engineers to tune the engine for more power. It is backed by a GM Powertrain 5L40 five-speed automatic transmission.

"The engine was built using the basic recipe that is available in the Ecotec performance book available from GM Performance Parts," said Al Oppenheiser, GM Performance Division director of concept and vehicle integration. "Also, the E85 conversion is based on a kit that GM is exploring for regular production engines."

True hot rod aesthetic:

Like hot rods built for the last 60 years, the FlexFuel Hot Rod is built from an assemblage of factory and aftermarket parts. The frame and body are based on the 1934 Chevy, but both were fabricated by the craftsmen at the GM Performance Division (GMPD). The body has been sectioned and channeled to give the car its true hot rod aesthetic, while the frame is a one-off piece designed, engineered and built by GMPD. The slanted grille – with a unique chrome mesh pattern – and hood are integrated for a smoother look, which includes a sun visor characteristic of period hot rod racers.

Like any good rod worth its salt, there are no fenders or running boards; the 10-inch headlamps are mounted to the core support. The front suspension is all custom-built, complete with period-perfect lightening holes drilled in it.

A sturdy 8-3/8-inch Winters Quick-change rearend is suspended by a parallel four-link suspension. It is filled with 5.20 gears, which are used to generate brisk acceleration with 35-inch-tall, racing-type Excelsior rear tires and 29-inch-tall front tires. The tires are mounted on custom 18-inch front and 20-inch rear "kidney bean"-style wheels from Budnik.

Steering comes from a custom-fabricated linkage that is connected to a reversed Corvair steering box. The linkage is mounted to the outside of the frame rail.

Hand-crafted cabin:

Inside, the FlexFuel Hot Rod maintains its racing-inspired minimalist theme, but with contemporary feel. Hand-formed sheet metal and earth-friendly materials were used to trim the cabin, as well as the racing-style aluminum seats. The dashboard was hand-finished, too, and filled with traditional-looking Stewart-Warner gauges.

One of the interior's central points of interest is the racing-style driveshaft tube, which covers the custom driveshaft. It is a prominent fixture in the cabin because the body has been lowered around the chassis to achieve the streamlined appearance that was characteristic of old-school hot rods.

Road ready:

More than just a conceptualized vision of an alternative-fuel street rod, the FlexFuel Hot Rod is a driver that GM Performance Division will press into service for a number of road events and tests.

"This thing is going to rack up a lot of miles," said Oppenheiser. "With the FlexFuel conversion, it can run purely on E85, gasoline or any combination of the two. That means it can be refueled anywhere the road takes it."

Sema 07 Update: Jay leno's E85 powered Corvette C6RS

There is no denying Jay Leno's love of cars, not to mention his involvement in the development of new technologies with General Motors. Meet the Corvette C6RS. The car that shows that green technology and performance can go hand in hand.

The C6RS started life as a Z06 that was restyled to resemble the C6.R race car. Performance is brought by a 8.2 liter (500 CID)aluminum small block V8 with 600 Horsepower and 585 ft lbs of torque. And it runs on E85 Ethanol rather than conventional gasoline. This is definitely a Corvette worth looking at. More info and pics below the jump.

Here is the official GM press release:

GREEN AND MEAN: JAY LENO'S E85-CAPABLE Z06-INSPIRED C6RS CORVETTE BOASTS 600 HP AND ALTERNATIVE-FUEL CAPABILITY

LAS VEGAS – "Tonight Show" host Jay Leno's predilection for performance cars is no secret, but many fellow enthusiasts may not know that he is keenly interested in alternative fuels. To prove that red-blooded power mixes easily with a touch of green, Leno partnered with Pratt & Miller – the engineering company that builds and campaigns C6.R Corvettes – to develop a modified Corvette Z06 that is capable of running on E85 ethanol. It was unveiled at the 2007 SEMA Show.

More than merely a conversion of the stock LS7 engine to E85 capability, Leno's alternative-fuel supercar is powered by a custom, 8.2L (500-cubic-inch) all-aluminum small-block V-8 that pumps out approximately 600 horsepower and 585 lb.-ft. of torque.

"The C6RS is the result of an idea we hatched to prove that high-performance cars and alternative fuel technology weren't diametrically opposed concepts," said Leno. "I love the idea of having 600 horsepower at my disposal, but using a homegrown alternative to gasoline.

"The engine is built around a custom aluminum cylinder block that was CNC-milled from a single block of billet aluminum. And while the cylinder heads, intake system and dry-sump oiling system are stock LS7 components, the engine – which has larger bore and stroke dimensions than the 7.0L (427-cubic-inch) LS7 – uses a one-off reciprocating assembly, including a forged steel crankshaft, forged rods and forged pistons. Katech Engines, the company that builds engines for the Corvette C6.R racing program, developed the engine.

The fuel system and engine control computer were modified to accommodate E85, and spent gases exit through a Corsa exhaust system. Supporting the 600-horse engine's power is a blueprinted and strengthened T-56 six-speed transmission and a high-performance Centerforce dual-friction clutch.

C6.R inspiration:

On the outside, Leno's bad and black C6RS emulates the styling of C6.R race cars, with wider front and rear fenders and a wider rear fascia with an integrated spoiler on top and a racing-style diffuser at the bottom (the diffuser incorporates an LED-lit backup lamp). A C6.R-style waterfall hood front fender louvers, rockers and lower grille opening further define this special Corvette – and all of the car's front-end panels are made of carbon-fiber, including custom brake air ducts routed through the front fenders. With all of its body modifications, Leno's C6RS is 1.6 inches wider than stock.

The C6.R's – and production Corvette's – aerodynamically styled bodywork is designed to slice efficiently through the wind, which helps enhance fuel mileage.

The race-ready look of the car is enhanced with a quartet of BBS wheels that feature racing-type locking center hubs. The forged aluminum 18-inch front wheels and 19-inch rear wheels ride on Michelin P295/30ZR18 and P345/30ZR19 tires, respectively.

Adding authenticity to the car's custom bodywork was the involvement of Pratt & Miller. The company took on the task of crafting Leno's Corvette into a street-going replica of the race cars, which included installing or fabricating a host of unique components, including:
* A custom DeWitt high-capacity radiator with dual cooling fans.

* A carbon-fiber ram-air induction system.

* Carbon-fiber inner fender panels that vent hot air from the engine compartment.

* Brembo brakes with six-piston mono-block calipers in front and four-piston rear calipers.

* Dyna-Mat used throughout the cabin and chassis to reduce interior noise.

While the exterior and drivetrain were inspired by the racetrack, the C6RS's cabin exudes luxury, with premium touches and enhancements from Genuine Corvette Accessories that include a two-tone shift knob and boot; leather-covered console armrest, parking brake handle and boot; an interior trim kit, racing-style pedal covers and more.

With its 600 horses on tap and domestically produced E85 fuel in the tank, Jay Leno's alternative-fueled C6RS is an all-American supercar that proves high performance and environmental consciousness go together like the Corvette and checkered flags.